Tag Archives: AMPS

Which AMP should I put in my Truck? Need HELP!?

I Have two Audiobahn ALUM12N 12″ Subs in a Bandpass box. I need an amplifier to push them and do not know where to start. Can anyone recommend one for me or give me some tips on what wattage amp to get for them? If possible recommend some amps that you know would work well with them. Below are the specs of the Subs. THANKS SO MUCH! This has given me a headache.Sensitivity: 96.4 dB
RMS Power Range : 1000 Watts
Peak Power Handling: 2000 Watts
Impedance: Dual 6 Ohm
Low Frequency response: 18 Hz
High Frequency Response: 500 Hz
Diameter: 12 Inch

Features
New 2005 Design Chrome Finished Cast Basket
Aluminum Voice Coil Former
Extended Pole Piece
Vented Oversized Back Plate
Flat Spider
120 oz. Double Stacked Strontium Magnets
PHAT 1.75″ EPDM Rubber Surround
Spun Aluminum 1-Piece Cone
3″ 4-Layer Edge Wound Voice Coil
Dual 6 Ohm
3 Ohm or 12 Ohm Operation
Mounting Depth: 5-5/8″
Cutout Diameter: 11-3/8″
Multi-connect Lug Lock Terminals

Which AMP should I put in my Truck? Need HELP!?

I Have two Audiobahn ALUM12N 12″ Subs in a Bandpass box. I need an amplifier to push them and do not know where to start. Can anyone recommend one for me or give me some tips on what wattage amp to get for them? If possible recommend some amps that you know would work well with them. Below are the specs of the Subs. THANKS SO MUCH! This has given me a headache.Sensitivity: 96.4 dB
RMS Power Range : 1000 Watts
Peak Power Handling: 2000 Watts
Impedance: Dual 6 Ohm
Low Frequency response: 18 Hz
High Frequency Response: 500 Hz
Diameter: 12 Inch

Features
New 2005 Design Chrome Finished Cast Basket
Aluminum Voice Coil Former
Extended Pole Piece
Vented Oversized Back Plate
Flat Spider
120 oz. Double Stacked Strontium Magnets
PHAT 1.75″ EPDM Rubber Surround
Spun Aluminum 1-Piece Cone
3″ 4-Layer Edge Wound Voice Coil
Dual 6 Ohm
3 Ohm or 12 Ohm Operation
Mounting Depth: 5-5/8″
Cutout Diameter: 11-3/8″
Multi-connect Lug Lock Terminals

Need Help On Which AMPLIFIER to Use?

I Have two Audiobahn ALUM12N 12″ Subs in a Bandpass box. I need an amplifier to push them and do not know where to start. Can anyone recommend one for me or give me some tips on what wattage amp to get for them? If possible recommend some amps that you know would work well with them. Below are the specs of the Subs. THANKS SO MUCH! This has given me a headache.Sensitivity: 96.4 dB
RMS Power Range : 1000 Watts
Peak Power Handling: 2000 Watts
Impedance: Dual 6 Ohm
Low Frequency response: 18 Hz
High Frequency Response: 500 Hz
Diameter: 12 Inch

Features
New 2005 Design Chrome Finished Cast Basket
Aluminum Voice Coil Former
Extended Pole Piece
Vented Oversized Back Plate
Flat Spider
120 oz. Double Stacked Strontium Magnets
PHAT 1.75″ EPDM Rubber Surround
Spun Aluminum 1-Piece Cone
3″ 4-Layer Edge Wound Voice Coil
Dual 6 Ohm
3 Ohm or 12 Ohm Operation
Mounting Depth: 5-5/8″
Cutout Diameter: 11-3/8″
Multi-connect Lug Lock Terminals

We’re trying to build a wind generator with a treadmill motor?

Any ideas on where to get the motor for cheap? It should be 260 vdc, 5 amps, with a 6” threaded flywheel. Short of hoping the dump has an old treadmill, where (online possibly) could we purchase one from?

We’re trying to build a wind generator with a treadmill motor?

Any ideas on where to get the motor for cheap? It should be 260 vdc, 5 amps, with a 6” threaded flywheel. Short of hoping the dump has an old treadmill, where (online possibly) could we purchase one from?

What do I look for in a solar powered battery charger for a 12 volt RV battery? Size, Amp? or watts?

I have a camper with a 12 volt deep cycle battery to operate lights. I am confused as to solar battery chargers. What type do I need to keep my battery charged while in use? Do I need certain amount of amps or volts or size of solar panel? Any recommendations as to brand?

How to Build Your Own Free Energy Device / Generator – Hatem Magnetic Cogging Replication

www.water4gas.com Visit this site to see other alternative energy products and info you can use to save you money today. Material suppliers: www.harborfreight.com 5″ Drill Press Milling Vice 5 Piece Lath Tool Set Quick Change Lathe Tool Post Set Generators Metal lathes www.windbluepower.com Alternators www.ebay.com Ebay Sellers who have motors with controls: kingsupplyonline friesen_electric Ebay is also a source for Brass, aluminum and grid-tie inverters. www.grainger.com Motors and controllers bushings Threaded brass inserts and screws http Neodymium magnets #RC48